The installation methods for external filter bags and internal filter bags are as follows:

0 5 0

Installation Method for External Filter Bags:

1. The bag mouth must be reliably sealed and fixed with the perforated plate.

2. The filter bag should be vertically suspended below the perforated plate.

3. Adjacent filter bags should not collide with each other.

4. The filter bag and the frame should fit correctly, and the frame should be straight without burrs.

Installation Method for Internal Filter Bags:

1. The upper end of the filter bag is equipped with a cap and is suspended from the dust collector beam through a suspension device, while the lower end is reliably sealed and fixed with the lower bag.

2. The tension of the filter bag should be adjusted to the specified value during installation to ensure that the filter bag does not loosen or fall off during filtering and backflushing. The tension should be readjusted after one week and again after one month of use.

3. The internal accessories of the filter bag (anti-collapse rings) should fit correctly, and all accessories should be free of burrs or fractures.

Shanghai Sffiltech Co., Ltd. provides pre-sales technical support, on-site installation guidance, and post-sales system maintenance follow-up, ensuring customers transition from confidence to peace of mind. It is your ideal choice.

Tag: The installation methods for external filter bags and internal filter bags are as follows: